官方的下载地址：http://www.keepalived.org/download.html

一、安装

# tar xzf keepalived-1.3.4.tar.gz
# cd keepalived-1.3.4
# ./configure --prefix=/usr/local/keepalived/
# make && make install

Tips 1：安装过程中提示：*** WARNING – this build will not support IPVS with IPv6. Please install libnl/libnl-3 dev libraries to support IPv6 with IPVS.

# yum install -y libnl3.x86_64
# yum install -y libnl3-devel.x86_64

Tips 2：configure: error: !!! Please install libnfnetlink headers. !!!

# yum install -y libnfnetlink.x86_64 
# yum install -y libnfnetlink-devel.x86_64

二、配置

配置可以参考：Keepalived的配置详解

三、启动

可以使用命令 /usr/local/keepalived/sbin -h 参看各启动参数。

启动
# ./keepalived -f /usr/local/keepalived/etc/keepalived.conf

 制作快捷启动

在源文件的目录./keepalived-1.3.4/keepalived/etc/init.d下有3个三个快捷启动的文件。

# cp ./keepalived-1.3.4/keepalived/etc/init.d/keepalived /etc/init.d/
# cp  /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
# cp ./keepalived-1.3.4/keepalived/etc/sysconfig/keepalived /etc/sysconfig/keepalived

＃keepalived的快捷启动，必须要执行以上三步，且文件路径必须一致，也不知道什么原因，
# 可能是init.d中的keepalived中已经指明了吧

 这样可以执行service keepalived [start | stop | reload | restart ]